Tuesday, June 9, 2015

Been Awhile

It's been awhile. A lot has progressed since the last time I posted because:
  • Finished the CNC machine!
  • Graduated from college with two degrees in engineering
  • Finished my internships.
  • Got a job at a major aerospace company
  • A couple patents pending...
  • Bought a house
  • Started working on my MBA in grad school
All this has kept me thoroughly busy, and unfortunately provides conflicts of interest when I post stuff here. So I may pick this up again in the future once I get a lull in the race of life. Full time work and school is plenty.

On the engineering side of things, I built a printrbot kit 3d Printer, and bought a xyz davinci 2.0. You can find some videos on the printrbot on my youtube.  I have to say it was an amazing feeling to build something, which then in turn builds other things. Mind blown. Get a 3D printer and go to thingiverse, it will change your life.
Off to do some homework!

Thursday, May 3, 2012

New hobby!

A friend of mine, David had a single wing R/C Glider. We went out and had a grand time flying it around. So after seeing that, I got "the R/C bug." I immediately started researching it and decided to buy a Micro DLG hand thrown glider. I wanted something light weight, durable, and would teach me to fly without being too costly.
My Micro DLG assembled
While it was unclear at the time, I bought what I thought were the correct accessories. I was mistaken and bought the wrong size receiver. It had a 2s battery not a 1s to drive it, so i bought a second receiver that was the correct one and built it after about 2-3 weeks of waiting for parts etc.. Here are the correct items I ended up using for this plane:

- Micro DLG Glider kit
- Spektrum DX6i radio ($160 shipped)
- Spektrum SPMAR6400T DSM Ultra Micro Receiver with Two Brushed ESC's ($60)
- (Extra battery) Two F-lite 1S 3.7V 150 mAh ($10?)
- Stuff from hardware store (superglue, glue sticks, glue gun, strapping tape, and double sided tape)


SuperCub - compared to 1 gallon milk jug
A week later, I also bought a Supercub LP from http://www.redrockethobbies.com for about $170. This was the recommended plane by the gentleman I spoke to at the store. Mind was the bind'n'fly version since I already had a Spektrum DX6i. Boy was this thing big! This was an excellent learners plane, but don't underestimate the wind. I also bought a cable so I could run the free simulator. It was a GWS FMS Cable with 1/8" Mono Plug for JR (GWFSM002B) This $20 purchase was well worth it! RC Desk pilot was perfect with it. I would highly recommend this purchase and practicing several hours before flying your motor powered plane!!! I spent about 4 hours on it, and practiced landing a bunch and got to about a 90% landing rate, I even found the exact model plane for the simulator. It was remarkably good practice for the real thing!

Sunday, July 31, 2011

CNC Machine progress

I've been working on my CNC, and documenting it primarily on CNCzone as I can find a lot of useful responses from experts. You can find my thread at:

For project ideas, I'm looking at the following sites:


I will not be making regular posts concerning my CNC machine on here anymore, since it has moved to the CNCzone forums.

Sunday, June 19, 2011

Wood CNC Frame













I finished my first milling project on the TAIG mill, really simple modification of an airsoft scope i had laying around. I bought some fiber optic cable online, opened the ACOG scope with Torx T10. I then milled out a through hole on the LED fixture internally, I also put a hole in the top of the ACOG to run the fiber optic cable through. Threading the fiber optic cable through resulted in this dot. It is still fully adjustable via thumb screws. This scope now works in nearly all conditions, with exception to nighttime. It does work at dusk. I'd argue it works better than an LED during a bright day.


On a second note, I decided to machine the wood frame I had planned on cnczone. This wood frame consists of only 2x4's. A very cost efficient design. HEAVY though, and lots of wood. Since it doesn't cost very much, and I want to get a move on, i'm making it with the intent to upgrade the machine with a fully design 8020 aluminum extrusion frame later. So I bought a hitachi miter saw, and went to work on about 9 pieces of 2x4's 8' long. 45 minutes later I had all the pieces cut. WOW this was so much faster than the circular saw i was using before.

Friday, June 17, 2011

Graduation and more!



























I've graduated (once) with a degree in Mechanical Engineering with a minor in math. Woooo! I don't feel done, because I have 4 more classes to go, and I get my 2nd degree in manufacturing. I'll be doing that after my next internship with MECOP.

I bought a TAIG mill from nick carter. Great fellow, helped me through some questions, and complications i encountered. I discovered how uneducated I am about ER16 collets. The hole in the collet is suppposed to be drilled offcenter to allow the collet to "snap" into place.

I didn't have a machinist square so I used my largest parallel to roughly square up the headstock. I hope to do a proper job when i get more equipment.

Wednesday, April 20, 2011

CNC documentation

I will stop, or slow down my documentation of the machine on this blog. I am now using cnczone to post all my progress on the personal CNC machine. You can find it here:


I also stumbled into this VB script/mod that someone via cnczone. Worth a look, I'll probably return to look at it when I have the machine completed.

http://ninoransenberg.com/2011/04/11/backlash-probe-for-mach-3-2/


Monday, March 14, 2011

Internet finds!

While I was browsing a thread on CNCZone I stumbled on this wonderful website. It has some articles from some old popular science articles concerning metal forming, welding, machining, etc..

http://www.knucklebusterinc.com/features/category/how-to/page/2/

After browsing i came to some conclusions about my CNC router build. From looking at http://www.probotix.com/power_supplies, i decided that I need to utilize XLR connectors such as the ones from this website. They have 8 ports, so now I just need to source some shielded 4 pair wire to solder it too. I also need to ensure the gage is rated for the current. They only sold 22 gage wire there, while it was shielded, I want to be able to carry a higher load without concerns.

-------
Also found this AMAZING video, showing how with a simple mechanical advantage and some properly formed metal, you can make a suit that amplifies your movement. Iron man watch out! I'm excited because this is definitely one of the projects i want to do when i have free time. (If ever lol.) Studying for my two degrees, and moving onto my second internship is keeping me away from finishing the cnc!

Enjoy!

Sunday, March 6, 2011

King Crab Walker Robot

For one of my classes I was given a toy robot to model and simulate. I took some time lapse video and made this compilation of it’s creation. Enjoy!

Tuesday, January 25, 2011

It moves!

Motor Mount Shims
So in order to make motor mount shims (which was required due to motor adapter geometry, and unplanned design) I found a piece of scrap composite board. After an attempt to cut it on the vertical band saw (blade was shot.) I moved to a manual saw blade, then a very helpful fellow who works in this shop pointed out a skillsaw I could use. I clamped it to the table, and made quick work of the board, to make 3 simple blocks to shim the motors with.

The last picture shows how it will shim the motor mount.
















With some more milling of the motor mount (which is tedious to remove from the nema23 motor by the way...) Holes were located and drilled through the shim, the motor mount, and the frame. It's obvious to see how i almost had serious clearance issues with these motor mount bolts.















Aside from bending the motor mount by being inattentive, I got it all attached to the ballscrew, and frame. I hooked it up to the computer, and ran some simple tests on mach 3. The same helpful shop fellow recognized that the bolts holding the ballscrew in place were sort of loose (which they are.) The issue is I used some readily available fasteners that don't quite fit right, and can't be completely tightened, so i need to buy some socket head cap screws.

Here is a video of the ballscrew moving via mach 3 commands.

Motor mounts, and frame progress.



After bringing all the components back to the senior project lab in school, and getting permission from various school officials to work on this project. I laid everything out. I loosely attached all the components to their mounting boards, and semi-permanently drilled drywall screws to attach the mounting boards to the 2x4 frames. This required a great deal of pre-drilling to ensure nothing cracked.

Using scrap 2x4s i machined some blocks to affix the y to the x axis. The
manner in which i assemble everything requires some careful thought. I put this on the back-burner to see if i want to make a solid aluminum plate design instead. You can see how the y axis will rest on the x when complete

These are some motors mounts i machined out of some scrap steel. One side is not flat, so it could be an alignment issue in the future, but it was a good exercise none-the-less.